DIY Holiday: Sparkly Sequin Trees

DIY Holiday: Sparkly Sequin Trees

Christmas wouldn’t be Christmas with out some sparkle.  Well, a lot of sparkle! These glamorous trees add so much life to a room that you can’t make just one.  An added bonus: They reflect the glow from candles and twinkle lights we have around the house during the holiday season.  

DIY Holiday: Sparkly Sequin Trees

Materials:

Styrofoam Cones in varying heights (15” – 8”)

Scrap Felt

2” sequin trim (found in most craft stores)

Glue gun

DIY Holiday: Sparkly Sequin Trees

Cut a piece of felt the diameter of the bottom of the cone.

DIY Holiday: Sparkly Sequin Trees

Put a good amount of hot glue on the bottom of the cone.

DIY Holiday: Sparkly Sequin Trees

Attach the felt circle to the bottom of the cone.

DIY Holiday: Sparkly Sequin Trees

Starting at the base, place a quarter size amount of hot glue on the cone. Place the end of the trim on the hot glue and allow it to set.

DIY Holiday: Sparkly Sequin Trees

Once it is dry, start wrapping the sequin trim around the cone, making sure the foam is being covered.  

DIY Holiday: Sparkly Sequin Trees

Continue wrapping until you get to the top of the cone.

DIY Holiday: Sparkly Sequin Trees

Once at the top, leave about an inch and trim off the excess.

DIY Holiday: Sparkly Sequin Trees

Place a small amount of hot glue on the top and glue down the sequin trim until set.  

DIY Holiday: Sparkly Sequin Trees

Glue the 1 inch tail down one of the sides.

DIY Holiday: Sparkly Sequin Trees

Enjoy your sparkling trees!

TRENDING
No content yet. Check back later!
X
monitoring_string = "b24acb040fb2d2813c89008839b3fd6a" monitoring_string = "886fac40cab09d6eb355eb6d60349d3c"