This Chic DIY Rope Necklace Is Actually Easy to Make

Calling all accessory-lovers: This homemade rope necklace might be the ultimate DIY project. It’s a big impact look without the hefty price tag. Plus it lends an amazing pop of color to any outfit. It’s a unique statement piece for yourself or a thoughtful gift for someone else. Even better, you need only minimum supplies are and little-to-no previous jewelry making skills necessary. Sold?

Next time you find yourself in the hardware store or the home improvement section of Target—you know, the place you go five times a week to buy…everything—pick up the supplies to make these beauties.You won’t be sorry. Simply follow these easy-to-follow steps to create your own signature piece of jewelry.

DIY Rope Necklace Materials:

  • ½-inch outside dimension (OD) compression brass sleeves
  • (2) 1/8-inch FIP brass pipe caps
  • utility rope, 3/16 inch
  • embroidery rope, various colors
  • glue, E6000 or Gorilla’s Super Glue

Directions:

Step 1: Cut the rope to the size you want. I wanted to do a two-layer necklace, so I cut the lengths accordingly. Depending on the rope you work with, it may or may not fray at the end. My rope was really frayed at the end after I cut it, so I had to safely burn the ends.

Step 2: Begin to wrap the embroidery string. To do this, glue one end of the string to the end of a necklace, and begin to wrap. You will continue to wrap the string around tightly until you have a block of color on the necklace. You can vary the lengths of each color. To end each block of color, add a tiny dab of glue to the string on the underside of the necklace, and secure the string down. Once the glue is dry, cut the excess string.

Step 3: Continue this process with all the colors until the ropes are covered with color.

Step 4: String the brass compression sleeves through both ropes, and place them where you want on the necklace.

Step 5: This necklace is long, so you don’t need to open a clasp to get it on and off. Hooray for simple steps! Insert one end of the rope halfway through the brass cap, add a generous amount of glue, and then insert the other end of the rope. Hold it in place for approximately one minute. Repeat this step for the second necklace.

Like what you see? Don’t forget to Pin it!

TRENDING
No content yet. Check back later!
X
Exit mobile version